Euro 260 bandsaw parts (342.186, US 310/320/330/340)

Parts, blades and tyres for the Inca Euro 260 bandsaw (342.186), sold in the US as the 310, 320, 330 and 340. It cuts up to 155 mm deep with a 260 mm throat, and takes blades 3–16 mm wide and about 1,865–1,875 mm long.

Here you'll find its rubber tyres, the 53.186.074 thrust bearing, side guides, blades, switches, fences and belts, each under its factory number. Keeping Inca machines working.

Quick facts: Euro 260 (342.186)
Cut height
155 mm
Throat
260 mm
Table
320 × 320 mm, tilts to 45°
Motor
450 W
Blades
3–16 mm wide, about 1,865–1,875 mm long
Tyres
54.186.077 rubber, 54.186.077P polyurethane (pairs)
Thrust bearing
53.186.074
Skip to results list
79 items
  • INCA 54.186.063 spring for rise and fall guide Euro 260 Bandsaw
    Sold out

    Inca 54.186.063 rise-and-fall guide spring, Euro 260 (342.186)

    Inca 54.186.063 rise-and-fall guide spring, Euro 260 (342.186)

    Part no. 54.186.063 · Fits Inca Euro 260 (342.186 · US 310–340)

    €28,38 EUR
  • Inca 54.186.045 INCA sign label for Euro 260
    Sold out

    Inca 54.186.045 INCA badge label, Euro 260 (342.186)

    Inca 54.186.045 INCA badge label, Euro 260 (342.186)

    Part no. 54.186.045 · Fits Inca Euro 260 bandsaw (342.186 · US 310–340)

    €14,49 EUR
  • INCA 53.025.136 15mm, 5/8" knife blade for Expert 500

    Inca 54.186.151 knife-edge blade, 15 mm (⅝″), Euro 260 (342.186)

    Inca 54.186.151 knife-edge blade, 15 mm (⅝″), Euro 260 (342.186)

    Part no. 54.186.151 · Fits Inca Euro 260 (342.186 · US 310–340)

    €53,07 EUR
  • INCA 54.186.328 tensioning screw top wheel Euro 260 Bandsaw

    Inca 54.186.328 top wheel tensioning screw, Euro 260 (342.186)

    Inca 54.186.328 top wheel tensioning screw, Euro 260 (342.186)

    Part no. 54.186.328 · Fits Inca Euro 260 (342.186 · US 310–340)

    €40,45 EUR
  • Start Capacitor for Expert 500 bandsaw 220V MOTORS

    Inca 58.19.2400 capacitor for early bandsaw motors, 110 V and 220 V

    Inca 58.19.2400 capacitor for early bandsaw motors, 110 V and 220 V

    Part no. 58.19.2400 · Fits early Inca bandsaws with Bauknecht or Magnetic motors, 110 V or 220 V

    €38,64 EUR
  • INCA 5.186.5200 Belt/pulley cover for early 342.186 Euro 260 Band saw, motor under bench

    Inca 5.186.5200 belt and pulley cover, early Euro 260 (342.186) with motor under the bench

    Inca 5.186.5200 belt and pulley cover, early Euro 260 (342.186) with motor under the bench

    Part no. 5.186.5200 · Fits early Inca Euro 260 bandsaw (342.186 · US 310–340) with the motor under the bench

    €34,40 EUR
  • Inca 53.186.050 cover for Euro 260 bandsaw 342.186 used good condition
    Sold out

    Inca 53.186.050 cover, Euro 260 (342.186), used, good condition

    Inca 53.186.050 cover, Euro 260 (342.186), used, good condition

    Part no. 53.186.050 · Fits Inca Euro 260 bandsaw (342.186 · US 310–340)

    €155,00 EUR

Also for this machine

Frequently asked questions

What blade length does the Inca Euro 260 take?

Blades of about 1,865–1,875 mm, from 3 to 16 mm wide. Our 1,865 mm Flexback length fits it, and we also list Inca-numbered blades for it in 6, 10 and 16 mm, with a 3 mm fret blade for tight scrollwork.
Is the Inca 340 the same machine as the Euro 260?

Yes. The Euro 260 (342.186) was sold in the US as the Inca 310, 320, 330 and 340, so its parts fit those machines too. Check the voltage on electrical parts: some switches are made for 110–115 V and others for 220–240 V.
Which tyres fit the Euro 260?

The Euro 260 left the factory with rubber tyres, part no. 54.186.077, which we sell as a pair. We also sell a polyurethane pair, 54.186.077P, which stretches on without glue. When tyres harden or crack, the blade starts to wander.
How do I set the thrust bearing?

The 53.186.074 thrust bearing sits behind the blade and stops it being pushed off the wheels. With the saw unplugged, bring it up until it stops turning, then back it off a hair, so it only spins while you cut. A bark as you ease off the feed means it is worn.
My part isn't listed. Can you find it?

Write to us with the part no., or a photo of the part and your machine's model, and we'll check what we can supply.

Part not listed?

We list more than 350 Inca parts by factory number. Send us the part no., or a photo and your machine’s model, and we’ll check.

Send a part enquiry