Multico PM22, PM22T morticer parts

Parts for the Multico PM22 and PM22T: chisel bushes for ⅝″, ¾″ and 13/16″ collars, the PM3864A chuck key (listed for the PM22), the brass-tipped chisel screw, the MCL cone sharpener, the two chisel setting jigs, the timber clamp handle and the yellow switch cover.

Most of these parts are shared with the other PM machines. Part not listed? Send us the Multico part number or a photo and we'll check.

Other Multico models

What we stock for the PM22 and PM22T
Chuck key
PM3864A, listed for the PM22
Chisel bushes
PM3875 (¾″ collar), PM3921 (13/16″), PM4146 (⅝″)
Setting jigs
CSJ (6–16 mm), CSJ-1 (16–25 mm)
Skip to results list
10 items

Which chisel bush?

Your chisel's collarBush
¾″ (19 mm), on chisels made for imported machinesPM3875
13/16″ (20.6 mm), on chisels made for British machinesPM3921
⅝″ (15.9 mm)PM4146

Measure across the round collar at the top of the chisel, not its cutting width. All three bushes are listed for the PM22 and PM22T.

Frequently asked questions

Which chisel setting jig do I need?

It depends on the chisel size. The CSJ jig takes chisels from 6 to 16 mm (¼″ to ⅝″) and the CSJ-1 from 16 to 25 mm (⅝″ to 1″). The jig lines the chisel's face up with the fence as you tighten it.
Which chisel bush do I need?

Measure the round collar at the top of your chisel, not its cutting width. Chisels made for imported machines have a ¾″ (19 mm) collar and take the PM3875 bush; chisels made for British machines have a 13/16″ (20.6 mm) collar and take the PM3921. A ⅝″ (15.9 mm) collar takes the PM4146. All three are listed for the Multico PM10, PM12, PM16, PM20, PM21, PM22 and PM22T.
How do I sharpen a mortise chisel?

Turn a sharpening cone inside the chisel, against the inside bevels, then rub the outside faces flat on a stone. Touch up the spurs of the auger bit with a file. Our MCL cone sharpener is listed for chisels from 3 to 25 mm (⅛″ to 1″).

Part not listed?

Send us the Multico part number, or a photo of the part and your machine's model, and we'll check.

Send a part enquiry