Multico Model K, K1, K3 morticer parts

Parts for the Multico Model K, including the K1 and K3: chisel sets in 8, 10 and 12 mm, in ¼″, ⅜″ and ½″, and in ⅝″ and ¾″, a 12 mm chisel, the depth-stop handle (Model K), the handle that locks the headstock's rise and fall, and the chisel clamps.

The metric set also fits the HM and HMT, and the ¼″–½″ set the HM, HMT and HML. Part not listed? Send us the Multico part number or a photo and we'll check.

Other Multico models

What we stock for the Model K
Chisel sets
MULKSETM (8, 10, 12 mm), MULKSETIMPERIAL1 (¼″, ⅜″, ½″), MULKSETIMPERIAL2 (⅝″, ¾″)
Handles
H-C111 depth stop (Model K), K55 rise-and-fall lock
Chisel clamps
H-61.790k
Skip to results list
11 items

Frequently asked questions

Which chisel sets fit the Model K?

Three sets are listed for it: 8, 10 and 12 mm (MULKSETM, also for the HM and HMT); ¼″, ⅜″ and ½″ (MULKSETIMPERIAL1, also for the HM, HMT and HML); and ⅝″ and ¾″ (MULKSETIMPERIAL2, for the Model K).
What gap should I leave between the bit and the chisel?

About 0.8 mm (1/32″) for chisels up to ¾″, and about 1.6 mm (1/16″) for larger ones. Set it with a coin as a spacer.
How do I sharpen a mortise chisel?

Turn a sharpening cone inside the chisel, against the inside bevels, then rub the outside faces flat on a stone. Touch up the spurs of the auger bit with a file. Our MCL cone sharpener is listed for chisels from 3 to 25 mm (⅛″ to 1″).

Part not listed?

Send us the Multico part number, or a photo of the part and your machine's model, and we'll check.

Send a part enquiry