The machine is only as good as the blade. This is our full range of bandsaw blades: Flexback blades for wood, Bimetal M42 blades for metal, sawmill bands and food blades for butchers' saws.
Choose the length your saw takes first, then the width for your tightest curve and the TPI for the thickness you cut. Stock Flexback and Bimetal M42 blades come in packs of two. Another length? We weld it to order.
| Blade | For | Sizes |
|---|---|---|
| Flexback | Wood: curves, everyday cutting and deeper cuts | 46 stock lengths; any length to order |
| Bimetal M42 | Steel, stainless and other metals; teeth 67–69 HRC | 13, 20 and 27 mm wide |
| Sawmill | Portable and stationary band sawmills | 32 and 38 mm wide, 1.07 mm thick |
| Food | Meat and bone on butchers' bandsaws | 16 mm, 4 TPI, packs of five |
| Knife-edge | Foam, leather, cardboard and other soft materials | 3 stock lengths; any length to order |
| Blade width | Tightest radius |
|---|---|
| 3 mm (⅛″) | 5.5 mm |
| 6 mm (¼″) | 16 mm |
| 10 mm (⅜″) | 32 mm |
| 13 mm (½″) | 63 mm |
| 16 mm (⅝″) | 95 mm |
| 19 mm (¾″) | 138 mm |
| 25 mm (1″) | 184 mm |
Keep at least three teeth in the cut; for wood, aim for three to six.
Choose it by the tightest curve you need to cut. A 6 mm blade turns a 16 mm radius, 10 mm needs 32 mm, 13 mm needs 63 mm and 25 mm needs 184 mm. The thickness does not change the curve; the width does. For straighter cuts, go wider.
Keep at least three teeth in the cut at all times. For wood, aim for three to six teeth in the stock, or six to eight when you want a steadier cut.
Yes. Flexback, Bimetal M42, knife-edge and food blades can all be welded to the length you enter. Order the custom-length blade for your length band and enter the exact length you need.
On a hobby saw, take the tension off at the end of the day. Break in a new Bimetal M42 blade at about 75% of normal speed and 50% of normal feed for the first 15 minutes.
Read the length in your saw's manual.
We list more than 350 Inca parts by factory number. Send us the part no., or a photo and your machine’s model, and we’ll check.
