Expert 500 bandsaw parts (342.025, US 710)

Parts, blades and tyres for the Inca Expert 500 bandsaw (342.025), sold in the US as the Inca 710. It runs on three wheels with a throat of about 505 mm, and takes blades of about 2,645 mm; our stock Flexback length is 2,640 mm.

Here you'll find its set of three tyres, side and back blade guides, blades from 3 to 25 mm wide, drive belts and fence bars, each under its factory number. Keeping Inca machines working.

Quick facts: Expert 500 (342.025)
Design
Three wheels
Throat
About 505 mm
Blade length
About 2,645 mm (stock Flexback: 2,640 mm)
Tyres
54.025.029, set of three
Skip to results list
64 items

Also for this machine

Frequently asked questions

What blade length does the Expert 500 take?

Blades of about 2,645 mm. Our stock Flexback length for it is 2,640 mm, and we list Inca-numbered blades for it from a 3 mm fret blade to 25 mm, including 6 mm in 6 and 14 TPI and the wide Aggressive Cut resharpenable blades.
Why do blades wear out sooner on the Expert 500?

The third wheel bends the blade once more on every turn, so it flexes more than on a two-wheel saw and fatigues sooner. Take the tension off at the end of the day, and don't fit a blade thicker than the wheels suit.
Is the Inca 710 the same machine as the Expert 500?

Yes. The Expert 500 (342.025) was sold in the US as the Inca 710, so the parts listed here fit it. Check the voltage on switches: we list a 110–115 V switch (58.04.2724) and a 220 V switch (58.04.3000).
Which tyres fit the Expert 500?

It takes three tyres, one for each wheel: part no. 54.025.029, sold as a set of three rubber tyres. Take the tension off at the end of the day.
My part isn't listed. Can you find it?

Write to us with the part no., or a photo of the part and your machine's model, and we'll check what we can supply.

Part not listed?

We list more than 350 Inca parts by factory number. Send us the part no., or a photo and your machine’s model, and we’ll check.

Send a part enquiry