Flexback bandsaw blades, 3,820 mm (150″), pack of two
6 × 0.65 mm (¼″ × 0.025″) · 4 TPI
€52,00 EUR
Skip to product information
In stock
Flexback bandsaw blades, 3,820 mm (150″), pack of two
Fits Jet JWBS-18 (2017+, 714700/714750), Startrite 401, Charnwood B400/3, Delta 28-345 and more
Part no. 3820
€52,00 EUR
Narrow for curves, wide for straight cuts. Tightest curve: 6 mm → 16 mm radius · 10 mm → 32 mm · 13 mm → 63 mm · 16 mm → 95 mm.
Keep at least 3 teeth in the cut. 6 TPI for everyday stock of 12–75 mm; 14 TPI for stock under 12 mm.
France: delivery calculated at checkout.
- Sent from Saint-Rémy, France
Fits / Category
These Flexback blades are 3,820 mm (150⅜″) long: the length some sellers supply as the 150-inch blade for the Startrite 502E, the Jet JWBS-20 made before 2017 (and the JWBS-20QT) and the Laguna LT16HD. Their makers give 150″ (3,810 mm), 10 mm shorter: check the length printed on your old blade.
Not on the list? Send us your saw's make and model and we'll confirm the length.
| Width | TPI | Use | Tightest curve |
|---|---|---|---|
| 6 mm (¼″) | 4, 6, 14 | curves | 16 mm |
| 8 mm (5/16″) | 6 | curves | – |
| 10 mm (⅜″) | 4, 6 | gentle curves | 32 mm |
| 13 mm (½″) | 3, 6, 14 | straighter cuts | 63 mm |
| 16 mm (⅝″) | 4 | ripping | 95 mm |
| 20 mm (¾″) | 3 | deep rips, resawing | 138 mm |
| 25 mm (1″) | 3 | resawing | 184 mm |
| 32 mm (1¼″) | 3 | resawing | – |
Resharpenable 30 to 40 mm blades are offered too. Another length? We weld it to order.
0.51–0.89 mm (0.020–0.035″) thick · pack of two · Flexback
Fits these machines (16)
- Charnwood B400/3
- Delta 28-345
- Jet JWBS-18 (2017+, 714700/714750)
- Jet JWBS-20 (pre-2017, 708752) / JWBS-20QT
- Laguna 16HD (LT16HD)
- Startrite 401
- Startrite 502E
- ACM LT16
- Delta 28 651
- Delta 28 652
- Delta 28 653
- Delta 28 654
- Delta 28 656
- Delta 28 662
- Delta 28 663
- Delta 28 665
Delivery and returns
France: delivery calculated at checkout.